Do you have a 10 or 12-inch sliding miter saw? If not, what are you waiting for? A sliding miter saw is a great addition to any workshop because it allows you to make angled cuts quickly and easily. Plus, the larger size can handle bigger projects. So which one should you buy? Here’s a look at the pros and cons of each size.
If you’re going to be cutting lots of larger pieces, a 12-inch sliding miter saw would be a better option. However, if you don’t think that will be the case, then buying a 10-inch model is fine as well. Your first decision when purchasing a sliding miter saw is which size you should get. The standard size is the 10-inch, but there are also 12-inch models available.
One of the biggest differences between these two sizes is that the 12-inch saw can cut larger pieces because it has a wider cutting capacity; it’s actually four inches greater than the 10-inch model (12 inches compared to 8 inches) at both 90 and 45 degrees. This means you’ll be able to make more angled cuts instead of having to reposition your material. However, if you don’t think this will be an issue for your needs then buying a 10-inch sliding miter saw instead would be fine as well. If this is an important feature for your workshop then go with the 12-inch model.
The other major difference between the two is that the 12-inch sliding miter saw can be more difficult to transport and move around. It weighs in at about 95 pounds, while the 10-inch model only weighs 60 pounds. If you’re going to be moving your saw a lot then this will clearly be an issue for you, but if you won’t have to move it much or don’t plan on taking it from job site to job site then getting a heavier model probably isn’t such a big deal.
What is the difference between a 10 and 12 sliding miter saw?
The main difference between a 10 and 12 sliding miter saw is in size. A 12-inch model will have the ability to make larger cuts, but cost more and be harder to transport because it’s heavier. If you don’t think that you’ll need this extra cutting ability then getting a smaller model would be fine as well.
Why do I need a sliding miter saw?
A sliding miter saw is a great tool for any workshop because it makes angled cuts much easier. The table on these models allows for easy angle adjustments from 0-50 degrees which makes your job much simpler since there isn’t as much hassle with positioning the material correctly before making an angled cut. Plus, larger sizes can handle bigger projects as well.
What are the advantages of a sliding miter saw?
The main advantage of a sliding miter saw is that it makes angled cuts much easier because there isn’t as much hassle with positioning the material correctly before making an angled cut. Plus, larger sizes can handle bigger projects as well. It’s also great to have one in your workshop for when you need to make a quick cut on plywood or paneling and don’t have time to set up a table saw.
How do I use a sliding miter saw?
Using a sliding miter saw is very easy because all you have to do is adjust the angle so that the blade lines up in the right orientation, line up your material (making sure it’s secure), and make your cut. It’s important to know that you should always turn the saw off before moving or adjusting the material, to avoid any unnecessary accidents.
How do I maintain a sliding miter saw?
One of the best ways to take care of your sliding miter saw is regular oiling; you’ll want to lubricate all of the metal parts every couple of months while cleaning after each use will keep your tool functioning properly and looking like new for years. You’ll also want to be sure that you’re changing out the blades regularly (about once a year) because they dull over time which can affect performance.
What are some things I need for my workshop?
While there are plenty of other great tools you can get for your workshop, there are a few that are absolutely necessary. You’ll need to get a hammer, screwdrivers (both Phillips and flat head), pliers, sockets, wrenches, measuring tape, and levels/straightedges. A pry bar is also very useful to have.
What should I know about buying power tools?
There are many things to consider when looking into purchasing power tools; the main thing to keep in mind is what you want out of the tool itself. What do you plan on using it for? How often will you be using it? Does it have all of the features you want or need? All of these questions are important because they’ll determine how well your tool will perform and how long it’ll last you.
What are the best power tools?
A miter saw is one of the most versatile power tools there is because it can be used to cut up nearly anything with accuracy for either large or small projects. A circular saw is another one of the most useful tools to have in any workshop because it allows you to make straight cuts through material, which means no more having to measure correctly before making your cut. A cordless drill lets you drive screws quickly and easily without needing an extra hand, plus they’re good for drilling holes through pretty much any material too. It’s also very important that you know how to use the tool properly, though; if not then accidents can occur very easily.
What are the 10 best power tools?
There are so many power tools available today that it can be hard to know which ones are worth your money, but there are definitely some great choices out there.
Here is a list of the top 10 most useful power tools:
1. Circular Saw – This tool makes cutting straight lines across material easy, plus it’s also great for making quick plunge cuts into plywood or paneling too.
2. Miter Saw – It might not be as powerful as some other miter saws on the market, but this one still offers enough features to make your projects far easier without breaking the bank on an expensive model.
3. Cordless Drill/Driver – Cordless drills make it easy to drill holes or drive screws without having to deal with tangled cords, plus they’re also good for tightening up loose screws.
4. Impact Driver – This type of driver is great for taking on tough jobs that need a lot of force because it packs more power per pound than any other tool out there.
5. Circular Saw Compound Miter – One of the most versatile saws you’ll find anywhere because it can cut at almost any angle without needing lots of different attachments.
6. Job-Site Radio – If you work in a workshop then this might not be necessary, but if you ever have to do work out in the open then having music makes your job much more enjoyable and easier.
7. Portable Power Station – This type of power station gives you the ability to jump-start your car or charge up your cell phone in an emergency, plus it also has a built-in radio so you won’t get bored while you do your work.
8. Oscillating Multi-Tool – Great for cutting through tough materials quickly because of its powerful motor and large cutting tool, plus it’s small enough to use both above and below eye level too.
9. Cordless Circular Saw – With enough power to cut through 2×12 boards without slowing down, this saw is great for working on job sites where every second counts towards getting the job done.
10. Nail Gun/Stapler – While this isn’t the most versatile power tool, it’s great for making quick work of nailing things together because you can fire off 20 nails in less than 10 seconds.
How do I choose the right size sliding miter saw?
When looking into buying a new sliding miter saw you’ll need to know what size works best for your needs; if it doesn’t fit then you could run into all sorts of problems during use, plus it makes transporting the tool much harder too. You should always measure out where you plan on putting your new saw before investing in one because this will ensure that the saw’s measurements are within your requirements.
Always keep in mind that some manufacturers tend to be more generous with their sizes so they might provide measurements that are slightly larger than they should be.
Conclusion
In the end, it is up to you to decide which saw is better for your needs. Both have their own advantages and disadvantages, but in the end, only you can decide which one will work better for your home improvement projects. Hopefully, this article has helped you make an informed decision about whether to buy a 10 inch or 12 inches sliding miter saw.
