Arbor Saw Vs Table Saw | What Is The Difference?

Whether you are a professional carpenter or just starting out, you have probably wondered whether an arbor saw or table saw is the better choice for your needs.

Both tools have their pros and cons, but in the end, the type of work you will be doing should determine which one is best for you.

In short, Arbor saws are handheld and require more arm strength, while table saws are larger and sit on a flat surface. Arbor saws are used for precision cuts, while table saws can be used for precision and rough cuts.

which one is better? It depends on what you’re looking to use it for. If you want to make clean cuts on small pieces of wood, the arbor saw is your best bet, I personally use Genesis for Precision cuts. For large or thick works that require rougher treatment (think tree-rings), use a table-saw instead! I recommend DEWALT DWE7485

In this article, I’ll outline the key differences between these two types of saws and help you decide which is best for your individual project. 

Arbor Saw

An arbor saw, also known as a backsaw or a hand saw, is used for general purpose cutting. This type of saw typically features a thin flexible steel blade held taut by two large wooden handles. I recommend Freud D0740A Diablo blade for Arbor Saw

They are mostly used by carpenters and other professionals to cut wood and sheet materials with nails or staples in them. You can tell if you have an arbor saw because like most hand tools it’s very lightweight and easy to use. 

These types of saws also tend to be shorter than the average table-saw blade (usually somewhere between 12″ – 24″). Also, due to their simplicity, there isn’t usually much that goes wrong with these types of saws, but when they do it’s usually something relatively easy to fix.

An arbor saw is the closest thing you’ll find to an ‘industrial’ saw that can be used at home perhaps with the exception of a skill saw or jigsaw. These are also incredibly handy if you want to cut dowel rods or any other long material down into smaller sections.

Table Saw

As the name implies, table saws are designed to sit on or be attached to a table for stability. They are usually larger and heavier than other types of saws which is because they need to have more power and the capacity to use larger saw blades in order to get the job done.

They can come with either a circular blade or a vertical blade which helps determine what you’ll use them for most. Best blade for table saw Is WEN BL1060.

Table saws are perfect for making precise cuts, but they’re also great for ripping material down quickly. If you need straight cuts that are uniform and accurate then this is the type of blade that’s best for your needs.

Also, if you don’t have any experience using tools like this then this may be the better choice because they include safety features such as anti-kickback pawls and riving knives to prevent any major injuries.

Comparison Between Arbor Saw Vs Table Saw

Arbor saws are less expensive than table saws:

Arbor saw is a saw with a thin flexible steel blade held taut by two large wooden handles. They are used by carpenters and other professionals to cut wood and sheet materials with nails or staples in them.

Table saws are usually more expensive than arbor saws: table saws are designed to sit on or be attached to a table for stability. They have more power and the capacity to use larger saw blades in order to get the job done.

Arbor saws are designed to use less power, but they still do the job. Arbor saws are used for cutting dowels rods or other long material into smaller sections.

A table saw is more heavy-duty than an arbor saw

A table saw is usually one of the most expensive types of saws you can buy, but they’re also some of the best tools on the market if you need a professional quality cut at home.

A table saw has several features that make it stand out from its counterparts it’s usually heavier and includes safety features such as anti-kickback pawls and riving knives to prevent any major injuries. 

On top of this, there are specific accessories that come with nearly every brand which can allow users to turn their saw into a miniature table.

An arbor saw is lighter weight and typically used when cutting thin material such as dowel rods or trimming thin wood at your job site. Arbor saws might not have all the features of a table saw, but they can still help you get work done quickly and without wasting a lot of power trying to cut through heavy materials that a typical handheld circular saw wouldn’t be able to manage.

If this still sounds too advanced for you then I recommend going with an arbor saw for your needs because it’s inexpensive and if something does go wrong there won’t be much damage done compared to what could happen with a table saw. 

Arbor saws require more skill to use than table saws

Table saws are perfect for making precise cuts, but they’re also great for ripping material down quickly. If you need straight cuts that are uniform and accurate then this is the type of blade that’s best for your needs.

Arbor saws require less power than table saws, but they still get the job done. Arbor saws are used for cutting dowel rods or other long material into smaller sections.

An arbor saw is lighter weight and typically used when cutting thin material such as dowel rods or trimming thin wood at your job site.

Arbor saws might not have all the features of a table saw, but they can still help you get work done quickly and without wasting a lot of power trying to cut through heavy materials that a typical handheld circular saw wouldn’t be able to manage. 

Conclusion:

So, what’s the verdict? Is an arbor saw or table saw better for your needs? In short, it depends on what you plan to use the saw for. If you need a portable saw that can easily be moved from job site to job site, an arbor saw is probably the best option.

However, if you need a more powerful and durable saw that can handle larger projects, a table saw is likely a better choice.

FAQs

What is a dual arbor table saw?

A dual arbor table saw is a type of saw that has two separate arbors (shafts) that each hold a blade. This allows for two blades to be mounted on the saw at the same time, which can be useful for making very precise cuts or for cutting different materials simultaneously. Dual arbor table saws are typically more expensive than regular table saws, but they can be a valuable addition to any workshop.

What is arbor in table saw?

An arbor is a shaft that holds a blade on a table saw.