Scroll saws are a great tool for woodworking, but they do require regular maintenance. One of the most important parts to maintain is the blade. If you’re not sure how to change it, this guide will walk you through every step!
Changing your scroll saw blade can be intimidating if you don’t know what you’re doing. Luckily, we have all the information and tips that will make changing your blade easy as pie!
You might think that changing a scroll saw blade is difficult or even dangerous, but with our instructions, it couldn’t be easier! We go over everything from removing old blades to putting in new ones so that nothing gets left out. Scroll down below for more details on how to change a scroll saw blade like an expert!
How to change a blade on a wen 16 in. scroll saw:
Here are some steps to help you change your blade on a WEN 16 in. scroll saw:
1. Get the right tools:
To change your blade, you’re going to need a screwdriver, wrenches, and pliers.
2. Turn off the saw:
Make sure the saw is turned off before beginning any work on it.
3. Remove the screws:
There are usually two screws located near the top of the saw that holds the blade in place. Use a screwdriver to remove them.
4. Lift the blade guard:
The blade guard is what covers the blade when the saw isn’t in use. Carefully lift it and set it aside so you have clear access to the blade.
5. Remove the old blade:
Use a wrench to loosen the bolt at the base of the blade. Hold onto the blade with your other hand and twist the wrench to loosen it. Once it’s loose, you can pull the blade out.
6. Put in the new blade:
Make sure the teeth of the new blade are facing down towards the table. Line up the bolt on the base of the blade with the hole on the saw table and tighten it up with a wrench.
7. Replace the blade guard:
Carefully slide the blade guard back into place and replace the screws at the top of the saw.
8. Turn on the saw and test it out:
Once everything is back in order, turn on your saw and test it out. If there are any problems, go back through these steps and check for mistakes.
Congratulations! You’ve now successfully changed your scroll saw blade. It might seem daunting at first, but with these simple steps, anyone can do it! Be sure to practice safety when working with any type of saw, and have fun creating beautiful pieces of woodwork.
FAQs:
What type of blade do you need for the project you’re working on?
Scroll saw blades come in many different shapes and sizes, so it’s important to choose the right one for the project you’re working on. There are general-purpose blades, fine-cutting blades, and even blades specifically designed for certain materials. Always read the instructions that came with your saw to make sure you’re using the correct blade.
How do you know when it’s time to change your scroll saw blade?
It’s a good idea to change your scroll saw blade whenever it starts to become dull or chipped. If the blade is too worn out, it can be dangerous to use and could cause damage to your project. Always err on the side of caution and replace your blade when it starts to show signs of wear.
Can you change a scroll saw blade while the saw is still turned on?
No, you should never try to change a blade on a scroll saw while it’s still turned on. It’s important to be safe when working with any type of saw, so always make sure the saw is turned off before beginning any work.
Can you change a scroll saw blade without removing the screws?
It’s possible to change a scroll saw blade without removing the screws, but it’s not recommended. If you don’t remove the screws, you won’t be able to lift the blade guard and you could end up hurting yourself. Always remove the screws before changing the blade.
What should you do if the saw starts vibrating when you’re using it?
If your scroll saw starts vibrating when you’re using it, it means the blade is out of alignment. Stop using the saw and go back through the steps to fix the alignment. You could also try tightening or loosening the blade bolt to see if that helps.
Conclusion:
Changing a blade on a scroll saw can seem daunting at first, but with these simple steps, anyone can do it! Be sure to practice safety when working with any type of saw, and have fun creating beautiful pieces of woodwork.
We hope this article was helpful and answered any questions you may have had about changing a scroll saw blade. If you still have questions, feel free to leave a comment below and we’ll do our best to help. Thanks for reading!