Changing the bearings on your Harbor Freight scroll saw is a great way to improve the performance and longevity of your saw.
The process is very simple and can be completed in just a few minutes. All you need is a few basic tools and supplies.
By following these simple instructions, you can change the bearings on your scroll saw in no time at all. This will help keep your saw running smoothly for years to come. For more information Stay tuned!
How to change bearings on harbor freight scroll saw:
Here are some steps on how to change bearings on a harbor freight scroll saw:
1. Unplug the saw:
Always unplug the saw before beginning any maintenance or repair work.
2. Remove the screws:
Remove the screws that hold the upper and lower blade guards in place.
3. Lift off the upper blade guard:
Once the screws are removed, lift up on the upper blade guard and set it aside.
4. Remove the lower blade guard:
Again, remove the screws that hold it in place and set it aside.
5. Remove the old bearings:
The old bearings can now be removed from the housing. There are usually three or four bearings in total, and they can be removed by pulling them out with your fingers or using a small screwdriver or pliers.
6. Install new bearings:
Install the new bearings by pushing them into the housing until they are fully seated. It is important to make sure that the bearings are all facing in the same direction before installing them.
7. Reinstall the lower blade guard:
Reinstall the lower blade guard by reversing the steps you took to remove it. Make sure that the screws are tight so that it is securely in place.
8. Reinstall the upper blade guard:
Reinstall the upper blade guard by reversing the steps you took to remove it. Again, make sure that the screws are tight so that it is securely in place.
9. Plugin saw and test:
Plug in the saw and test to make sure that it is running properly. Congratulations, you have just changed the bearings on your Harbor Freight scroll saw!
Identify the bearings that need to be replaced:
The bearings that need to be replaced on a Harbor Freight scroll saw are usually the ones that are noisy or difficult to turn.
If you are not sure which bearings need to be replaced, you can always contact the manufacturer for assistance.
FAQs:
What bearings do I need to change on my harbor freight scroll saw?
The bearings on your Harbor Freight scroll saw can be replaced with any standard size bearings.
Can I change the bearings on my harbor freight scroll saw myself?
Yes, you can change the bearings on your Harbor Freight scroll saw yourself. It is a very simple process and only takes a few minutes.
Where can I find replacement bearings for my harbor freight scroll saw?
Replacement bearings for your Harbor Freight scroll saw can be found at most hardware stores or online. Just make sure to get the correct size before purchasing them.
How often should I change the bearings on my harbor freight scroll saw?
It is recommended that you replace the bearings on your Harbor Freight scroll saw every year or two, depending on how often you use it.
By following these simple instructions, you can easily do this yourself.
What type of lubricant should I use on the new bearings?
When installing new bearings, it is important to use a quality lubricant to help keep them running smoothly.
A good option is motor oil, which can be purchased at most hardware stores. Simply apply a small amount of motor oil to the bearings before reinstalling them. This will help reduce friction and keep your saw running like new.
What should I do if the new bearings don’t seem to be working properly?
If the new bearings don’t seem to be working properly after installation, there may be something wrong with them. Contact the manufacturer for assistance if this is the case.
Conclusion:
Bearings are an important part of any scroll saw, and by following these simple instructions, you can easily change them yourself. Not only will this help keep your saw running smoothly, but it will also extend the life of your machine. So don’t wait, replace those old bearings today!
We hope this article was helpful and that you now know how to change the bearings on your Harbor Freight scroll saw. If you have any questions or comments, please feel free to share them below. Thanks for reading!