How To Change Blade On Porter Cable Circular Saw?

Tools:

• Screwdriver
• Circular Saw Blade (as well as the base plate it screws into)

A Video Guide On How To Change Blade On Porter Cable Circular Saw:

Instructions How To Change Blade On Porter Cable Circular Saw: 

Follow these simple steps, and you’ll have your Porter Cable saw up and running with a brand-new blade in no time at all. Happy sawing!

Shut Off The Saw And Unplug It From The Power Source

1. Unless you want to be the one providing power (to your saw) while attempting this job. 
2. Pop-out the old base plate by using your screwdriver to pull up on the tiny metal tabs located at each corner: use a Phillips-head or flat-head screwdriver, unless you’ve got magnetic tools; then go for it. 
3. Screw-in one of the bolts included with the replacement base plate into the hole that was abandoned when you ejected the old one: it’s best to pre-thread these bolts through their corresponding holes before plugging them back in. 
4. Fit the new blade into the base plate, pressing down until you hear a soft click: this is important. The new saw-blade must “click” into place, it’s how you know that everything is properly seated and secure. 
5. Replace the second bolt in each corner of the newly-installed base plate with one provided for in the replacement kit: once again, pre-threading is easier than trying to do it after everything’s in place. 
6. Tighten wing-nut back onto the circular saw, plug into a power source, and turn on.

Remove The Screws That Hold The Blade Guard In Place:

1. This will make the next step easier. 
2. Unscrew screws from the old blade, and attach to the new one: simple enough, right?
3. Put screw down into its place on the base plate, along with two wing-nuts provided for installation in a replacement kit. 
4. Once you’ve got a firm grip on that newly-installed blade, you’re ready to take it for a spin. 
5. Make sure that your saw is off and unplugged from the power source before starting this step: think of safety first. 
6. Turn on the circular saw and test out your brand new blade by cutting some scrap wood or other objects around the house. Make any necessary adjustments to the blade tension, and you’re good to go.
7. It is best practice to have someone assist you with this process. This is to ensure safety for yourself as well as others. If you need assistance, contact your local hardware store for further help. It is also recommended that the circular saw be unplugged before starting. Ensure that the power source is turned off before beginning to avoid any injuries.
8. There are several different types of screws on the saw that hold the blade guard in place. Carefully remove these screws. If you have trouble removing these, you might want to use some pliers for more leverage. The next step is to unscrew or unscrews from the old blade and attach it to the new one. It is recommended that you do this carefully. 
9. Use caution when doing this. Install the screws in their corresponding places on the base plate once you’ve got a firm grip on the newly-installed blade. Tighten wing nuts if necessary. You are now ready to test out your saw by cutting some scrap wood or objects around your house. Make any necessary adjustments to blade tension as needed. 
10. The porter cable saw is a circular saw that is manufactured by the Porter Cable company. The replacement kit for this tool can be purchased at most hardware stores, such as Lowe’s and Home Depot. It is designed for use with P-C 690 or 690LR type saws.
11. These steps will ensure that the blade change process is easy and efficient. There are several different types of screws on the saw that hold the blade guard in place. Carefully remove these screws, as they may require some further strength or leverage from a set of pliers to get off. 
12. If you have trouble removing them, it is recommended that you take your saw to a local hardware store. Unscrew or unscrews from the old blade, and attach to the new one. The next step is to install the screws in their corresponding places on the base plate once you’ve got a firm grip on the newly-installed blade. Tighten wing nuts if necessary. 

Insert The New Blade Into The Saw and Replace The Blade Guard:

1. This is important. The new saw-blade must “click” into place, it’s how you know that everything is properly seated and secure
2. Replace the second bolt in each corner of the newly-installed base plate with one provided for in the replacement kit: once again, pre-threading is easier than trying to do it after everything’s in place plug into a power source and turn on.
3. Remove the screws that hold the blade guard in place: this will make the next step easier. 
4. Unscrew screws from the old blade, and attach to the new one: simple enough, right? 
5. Put screw down into its place on the base plate, along with two wing-nuts provided for installation in a replacement kit. 
6. Once you’ve got a firm grip on that newly-installed blade, you’re ready to take it for a spin. 
7. Make sure that your saw is off and unplugged from the power source before starting this step: think of safety first. 
8. Turn on the circular saw and test out your brand new blade by cutting some scrap wood or other objects around the house. Make any necessary adjustments to the blade tension, and you’re good to go.
9. It is best practice to have someone assist you with this process. This is to ensure safety for yourself as well as others.

Conclusion:

I’ve shown you how to change the blade on your Porter Cable circular saw. The process is simple and only requires a few tools. Be sure to always wear safety goggles when working with power tools and follow all of the manufacturer’s instructions for your particular model of circular saw. Now that you know how to do it, go ahead and give it a try!