How to cut 3 holes with a jig saw

Do you need to cut three holes in a piece of wood and don’t know how to use a jigsaw?

A jigsaw is a great tool for cutting curves and shapes into the wood, and with the right technique, it’s easy to create evenly spaced holes. We’ll show you how to do it.

You’ll be able to complete your project quickly and easily with the help of this guide. Follow our simple steps and you’ll have perfect results every time.

How to cut 3 holes with a jigsaw:

Here are some steps on how to cut 3 holes with a jigsaw:

1. Choose the right saw blade. The type of material you will be cutting will determine the best saw blade to use. For metal, choose a hacksaw blade. For plastic or wood, choose a fine-tooth saw blade.

2. Mark where you want to cut the hole on the material. You can use a ruler or a straight edge to help make your markings accurate.

3. Align the blade of the jigsaw with the markings and tighten the clamp. Be sure that the blade is facing in the correct direction before tightening it down – if it’s not, the cut will not be straight.

4. Start cutting slowly and increase speed as you get closer to the end of the cut. It’s important to maintain control of the saw at all times, especially when making curves or intricate cuts.

5. When you’re finished cutting, release the clamp and remove the blade from the material. Clean up any debris from the cut and admire your handiwork!

Tips for cutting curves:

If you need to make a curve, try to position the material so that it’s as flat as possible. This will help you maintain control of the saw and produce a smoother cut.

You can also use a piece of wood as a guide to help make the curve more accurate. Just clamp the wood in place and run the jigsaw along the edge to follow the curve.

Safety Tips:

Here are some safety tips to remember when cutting three holes with a jigsaw:

1. always read the instruction manual before using any power tool;

2. wear safety goggles to protect your eyes from debris;

3. use a saw stand or clamp the workpiece to avoid potential injury;

4. keep fingers and other body parts clear of the blade at all times.

Some common mistakes:

Here are some common mistakes people  make when cutting 3 holes with a jigsaw:

1. Not securing the workpiece properly.

2. Not using the proper blade for the material being cut.

3. Not following the line correctly.

4. Cutting too fast.

5. Not finishing the cut properly.

Here’s how to avoid these mistakes and cut 3 holes perfectly every time:

1. Secure the workpiece properly:

Clamp it down or use another method to make sure it doesn’t move while you’re cutting. 

2. Use the proper blade for the material being cut:

A metal-cutting blade for metal, a wood-cutting blade for wood, etc.

3. Follow the line correctly:

Use a pencil to mark the cutting line and make sure you follow it.

4. Cut slowly and evenly:

Don’t try to hurry, go too fast, or force the blade. Just let the blade do the work.

5. Finish the cut properly:

Once you’ve reached the end of the cutting line, slow down and guide the blade off of the workpiece carefully. Don’t just let the blade snap off the workpiece.


What type of saw blade should you use to cut holes in wood? 

The type of saw blade you should use to cut holes in wood depends on the size and depth of the hole you need to cut. For small, shallow holes, you can use a standard jigsaw blade. For larger or deeper holes, you will need a more specialized blade, such as a hole saw or spade bit.

Is there a certain way to hold the jigsaw when you’re cutting?

There is no one right way to hold the jigsaw when you’re cutting. However, it’s important to keep your hands and fingers clear of the blade and to maintain a firm grip on the saw. In general, it’s best to hold the jigsaw with both hands, keeping your arms close to your body.

What type of jigsaw should you use for cutting holes in wood?

There are many different types of jigsaws on the market, and any type can be used for cutting holes in wood. However, if you’re going to be doing a lot of hole-cutting, you may want to invest in a specialty jigsaw, such as a hole saw or spade bit.


That’s it! You now know how to cut three holes with a jigsaw. Just remember, take your time and be patient. This is a precision tool and if you rush, you may not get the results you desire.

Now that you have the basics down, experiment with different shapes and sizes to see what works best for your project. Have fun and happy sewing!