Scroll sawing is a great way to cut thin pieces of wood, and with the right technique, it’s easy to cut multiple layers of veneer at the same time. In this tutorial, I’ll show you how to do it.
The best part about this technique is that you don’t need a lot of experience or special tools – just a scroll saw and some veneer.
With a little practice, you can quickly and easily create beautiful projects with multiple layers of veneer. Follow along with this tutorial and see for yourself how easy it is!
How to cut multiple layers of veneer on a scroll saw:
Here are some steps to follow to cut multiple layers of veneer on a scroll saw:
Adjust the blade height:
You’ll want to adjust the blade height so that it’s slightly higher than the thickness of your veneer.
Clamp the workpiece:
Clamp the workpiece securely to your workbench.
Make a cut in the top veneer:
Make a cut in the topmost layer of veneer, using a push stick to help keep your fingers safe.
Make a kerf:
With the blade still running, use a chisel or other sharp tool to make a kerf (a cut) in the underlying wood. This will help prevent the layers of veneer from slipping while you’re cutting them.
Cut the remaining veneers:
Cut through the remaining layers of veneer, using the same technique.
Remove the clamps:
Once you’re finished cutting, remove the clamps and discard the topmost layer of veneer.
Clean up the cut edges:
Use a chisel or sandpaper to clean up any rough edges around the cuts.
That’s it! You’ve successfully cut multiple layers of veneer on a scroll saw. Happy woodworking!
Safet Tips:
Here are some safety tips to keep in mind when cutting multiple layers of veneer on a scroll saw:
Make sure the blade is sharp and in good condition. A dull blade can cause the wood to heat up and potentially cause a fire.
Keep the fingers of your non-cutting hand behind the piece of wood at all times.
If the blade binds in the wood, stop cutting immediately and take a look at what is causing the problem. You may need to make some adjustments to the saw or the wood.
Be especially careful when cutting thin pieces of veneer, as they are more likely to break or tear.
Never try to free a stuck blade by force. This can easily lead to injury.
Keep the work area clean and free of debris. This will help prevent accidents from happening.
By following these safety tips, you can safely cut multiple layers of veneer on a scroll saw.
Some common mistakes:
Here are some common mistakes people do when cutting multiple layers of veneer on a scroll saw:
1. Not calculating the blade depth properly
This can result in the blade going through the veneer and into the substrate, which can cause damage.
2. Not using a backer board
This will help to prevent the chipping and peeling of the veneer.
3. Cutting too fast
This can cause the veneer to chip or crack.
4. Not clamping the workpiece securely
This can cause the workpiece to move while being cut, resulting in an uneven edge.
5. Not using a featherboard
A featherboard helps to keep the workpiece pressed against the fence, ensuring a clean cut.
By following these tips, you can ensure that your veneer cuts are clean and accurate.
Conclusion:
I hope you found this scroll saw article helpful. In it, we showed you How to cut multiple layers of Veneer on Scroll Saw. While the process is a bit more time-consuming than cutting a single layer of veneer, the results are well worth it.
If you have any questions or feedback about this article, please don’t hesitate to let us know in the comments below. Happy scrolling!
FAQs:
How do you avoid tear-out when cutting multiple layers of veneer?
One way to avoid tear-out is to make sure the veneer is well-glued to the substrate. You can also use a backer board to help prevent tear-out. Another way to avoid tear-out is to cut slower and use a more gentle cutting action. Finally, you can use a featherboard to keep the workpiece pressed against the fence. This will help to ensure a clean cut.
How do you prevent the veneer from chipping or peeling?
One way to prevent the veneer from chipping or peeling is to use a backer board. Another way to avoid this is to cut slower and use a more gentle cutting action. Finally, you can use a featherboard to keep the workpiece pressed against the fence. This will help to ensure a clean cut.
What type of blade do you typically use to cut veneer?
A thin-kerf blade is typically used to cut veneer. This type of blade has a narrower cutting width, which helps to reduce the amount of material removed from the veneer. This can help to prevent chipping and peeling. You can also use a blade with fewer teeth, as this will create a smoother cut.
Can I use a regular saw blade to cut multiple layers of veneer?
No, it is not recommended to use a regular saw blade to cut multiple layers of veneer. A regular saw blade has a wider cutting width, which can result in the veneer being ripped apart.