How To Cut Plexiglass With A Reciprocating Saw?

If you’re looking for an easy way to cut plexiglass, a reciprocating saw is the tool for you. With a few simple steps, you can quickly and easily make clean cuts in this versatile material.

In addition, a reciprocating saw is also perfect for cutting through other materials like wood and metal.

So if you’re looking for a versatile saw that can handle a variety of tasks, a reciprocating saw is the tool for you. With a little bit of practice, you’ll be able to make clean, precise cuts in no time. In this blog post, we’ll show you how to do just that. 

How To Cut Plexiglass With A Reciprocating Saw?

A reciprocating saw is a great tool for working with plexiglass.

As you’ll see in the step-by-step guide below, cutting plexiglass with a reciprocating saw is fairly easy and requires very little skill or experience.

With just a few simple steps and tools, you can enjoy clean and precise cuts that will leave your jigsaw envious. Below is the step-by-step guide to cutting plexiglass with a reciprocating saw.

Steps To Cut Plexiglass With A Reciprocating Saw:

Step 1: Place the Plexiglass

Place your piece of plexiglass on a flat surface. Make sure that you’re working in a well-lit area and that there aren’t any obstacles around that could get caught in the reciprocating saw’s blade.

These things can happen very quickly, so make sure to keep them in mind before you start.

Step 2: Mark the Plexiglass

Use a pencil to mark the plexiglass where you want to make your cut. Use large, clear markings to indicate what parts of the plexiglass you want to cut away and which sections need to be kept.

Planning ahead is key in any project, so make sure to take your time and plan ahead.

Step 3: Draw a Guide Line

Draw a guide line on the plexiglass that represents the reciprocating saw blade’s path along its entire length. Keep in mind that reciprocating saw blades only cut on the up-and-down motion, so make sure not to miss any sections of your mark with your lines.

If you do, it will result in inaccurate cuts, which can leave jagged edges. Again, this is why planning ahead is key!

Step 4: Cut Along Your Lines

Secure the plexiglass into a vice or clamp it onto a workbench for stability. Make sure that you’re wearing protective eyewear as well as hearing protection if you have it.

Secure the reciprocating saw onto the plexiglass right on top of your guide line, making sure that the reciprocating saw’s blade is facing up. Then simply start plunging the reciprocating saw down along its entire length, following your guide lines.

The reciprocating saw will cut through the plexiglass easily and accurately every time, no matter how long or thick your piece of plexiglass is.

Step 5: Clean Your Cuts

After you’ve cut all the way across your plexiglass, let it sit for several minutes so that it can cool down before handling it again. While cooling, use a pair of wire snips to clip away any jagged edges or hanging shards of plexiglass.

After you’ve finished clipping away any jagged edges, use a pad sander to smooth down any sharp or rough spots and finish your project.


Before using plexiglass for your next handiwork, make sure to read up on reciprocating saw safety tips and know, how to cut plexiglass with a reciprocating saw along with these practical steps.

You’ll be able to achieve perfect cuts every time with the reciprocating saw. And remember that practice makes perfect! So don’t get discouraged if your first few attempts go awry. Just have fun, experiment with different types of reciprocating saw blades and eventually, you’ll find what works best for you.

Thank you so much for reading this blog post about reciprocating saws, and I hope you learned everything you needed to know to get started reciprocating sawing plexiglass pieces.


Q: Where can I buy reciprocating saw blades?

A: You can usually find reciprocating saw blades at hardware stores like Lowe’s or Home Depot, as well as online retailers like Amazon.

Be sure to check the reciprocating saw blade packaging before purchasing them to make sure that they are compatible with your reciprocating saw.

Q: Are reciprocating saws dangerous?

A: Reciprocating saws are very safe when used properly, but if mishandled they can be dangerous, so it’s important to remain aware at all times.

Just remember the reciprocating saw safety tips provided in this blog post and you should be fine.

Q: Why is reciprocating sawing so accurate?

A: One of the main reasons reciprocating saws are so accurate is because their blades move up and down instead of side-to-side like jigsaws do, eliminating any potential for wavy cuts.

Also, reciprocating saw blades come in a variety of shapes and sizes that allow you to customize your cuts to fit your project specifications perfectly.

So if you’re looking for an efficient way to cut plexiglass accurately and perfectly every time, reciprocating saws may just be the tool for you.

Q: What Is The Best Tool To Cut Plexiglass?

A: Though reciprocating saws are very accurate, they’re also a bit difficult to use. So if you’re looking for something that’s easy to handle and operate as well as accurate, reciprocating saws might not be your best option.

If that sounds like you, then our recommendation is to look into buying a jigsaw instead.

Q: How Do You Cut Plexiglass Without Chipping?

A: Planning ahead and using a reciprocating saw with a fine-toothed blade will help you make the best cuts possible. Basically, the smoother and more precise your cuts are, the less likely they’ll chip or crack – so take your time and work methodically.

Q: What’s The Difference Between Acrylic And Plexiglass?

A: Plexiglass is another term for acrylic, so they’re basically the same thing. The word plexiglass is just a shorter way of saying ‘acrylic’.

So reciprocating saws can be used to cut both types of materials without frustration or complications.

Q: How To Cut Plexiglass Without Cracking?

A: As long as you’re using a reciprocating saw with a fine-toothed blade, your plexiglass should be cut without cracking. Just remember the reciprocating saw safety tips provided in this blog post and you’ll be fine.

In conclusion, reciprocating saws are a great way to cut plexiglass accurately and effortlessly. If you’re looking for a safe and efficient reciprocating saw guide, follow the reciprocating saw guide in this blog post and you should be good to go.

Q: How To Cut Thick Plexiglass?

A: Cutting thick plexiglass may require a reciprocating saw with a thicker blade.

With reciprocating saws, you can easily buy and replace your reciprocating blades as needed, so you won’t need to purchase an entirely new reciprocating saw just because the standard blades aren’t working for you.