How To Fix A Reciprocating Saw Breaking In Half

Have you ever been working with your reciprocating saw and it suddenly breaks in half? If so, don’t worry! You can fix your broken reciprocating saw. It’s not as hard as you think. In fact, we have a step-by-step guide for how to do just that right here on our blog. We also have some FAQs about the topic if you want to learn more before getting started. So what are you waiting for? Let us help you understand how to fix a reciprocating saw breaking in half.

What To Do If Your Reciprocating Saw Breaks In Half

The first thing you should do if your reciprocating saw breaks in half is to assess the damage. If any of the blades are still intact, you will probably be able to use them at least one more time before they need to be replaced.

If all of the blades are broken or missing entirely, then it’s time to place a new order. These blades usually last for a long time, but once they wear down to the point of breaking, you should probably order a new one or two for replacements.

What Tools Do I Need To Fix It

  • Screwdriver
  • Pliers or wrench
  • Safety Glasses
  • Work Gloves

How To Fix A Reciprocating Saw Breaking In Half

Once you have assessed the damage of your reciprocating saw, it’s time to get started. You can learn how to fix a reciprocating saw by following this simple guide below.

First, you will want to remove the back of your saw. This is the section that houses all of your reciprocating blades and makes it easy to change them when they need to be replaced. Don’t worry about really breaking off anything in this step, because all you need to do is take out one screw with a screwdriver and then gently pull the back off.

Once you have removed the back, you will then need to take out another screw that’s holding your blade into place. Slowly pull it up and away from the body of the saw, but be careful because it is still attached by a dangerous wiring harness at this point.

Finally, slowly pull the blades outward so they separate and you can replace them with new ones or use them one last time if they are still intact. You should only put pressure on these blades when they face down because there isn’t enough space to apply too much force without breaking them entirely.

Causes Of A Reciprocating Saw Breaking In Half

There are many reasons that your reciprocating saw could break in half. If you have used it outside of its specifications, then the blades will wear out faster than usual and could possibly break together. The same thing goes for using your reciprocating saw for too long. After repeated use, the blades become worn down to the point where they can’t handle being slung back and forth any longer.

Tips For Preventing Reciprocating Saw From Breaking In Half

If you are worried about your reciprocating saw breaking in half, then there are some things you can do to prevent it from happening. The first thing is to always use the tool for its intended purposes. It means that don’t try using your reciprocating saw for something that is not recommended by the manufacturer. You should also avoid expecting too much out of this power tool because it has a limited range of motion and functionality. If you use it correctly, then your reciprocating saw will last a long time without breaking it in half.

Common Problem With Reciprocating Saws And How To Fix It

Another common problem with reciprocating saws is when the blade gets stuck in the body of the saw and won’t move at all. For this specific issue, it can sometimes be fixed by completely removing and then reattaching the blade back into its place inside the tool. If that doesn’t fix your reciprocating saw from getting stuck, then you might need to replace your current blade because it could be somehow warped or damaged beyond repair.

Benefits Of Using A Reciprocating Pole Saw

The benefits of using a reciprocating pole saw are as follows:

  • It is easy to use
  • Reach high branches with ease
  • Cut through large branches quickly
  • No need for a ladder
  • Good for cutting down very small and weak trees
  • Cuts through a variety of materials
  • Great for DIY projects


Q: Can I fix my broken reciprocating saw blade?

A: Yes! You should be able to take apart your broken blade or buy a new one that works with your specific model of this tool.

Q: Can I fix my reciprocating saw with just a screwdriver and pliers?

A: Technically yes, but we don’t recommend it. It’s much more dangerous than using the proper tools and can take you a lot longer to finish as well.

Q: How do I know what size blades to buy?

A: Your reciprocating blades should come with an attached label that has the name of your saw on them as well as the measurements. Otherwise, they are usually labeled somewhere online where you can easily find them and purchase replacements.

Q: Can I just replace a broken blade instead of the whole device?

A: No, because each part is specifically designed for a certain job and put together in a specific way. If you only need to replace one blade inside of your reciprocating saw, then there is no need to order or purchase another entire device. You can fix this problem yourself by buying a replacement blade. But if the whole device needs to be replaced then this problem can’t be fixed by just replacing a blade instead.

Q: What Are Reciprocating Saw Blades Made Out Of?

A: Reciprocating saw blades are generally made out of steel or carbon steel. Some people have used titanium or alloy blades, but their durability cannot compare to that of traditional metal blades. These blades can also be coated with other types of materials, such as ceramic and diamond coatings, which help maintain their edge longer.