How to install a scroll saw blade

Installing a scroll saw blade is an important part of the sawing process. There are a few things you need to know before you get started. Scroll saw blades come in a variety of sizes, shapes, and types. It’s important that you select the right blade for the job at hand. In this article, we will show you how to install a scroll saw blade quickly and easily. Follow these simple steps and you will be up and running in no time!

1. Remove the old blade

Before you can install a new blade, you need to remove the old one. Most scroll saws have a quick-release mechanism that allows you to do this quickly and easily. Simply pull the knob or lever and the blade will release from the saw.

2. Install the new blade

Once the old blade is removed, install the new one. This is a simple process that only takes a few seconds. Align the teeth of the new blade with the slot in the saw and push it into place. Make sure that it is fully seated in the slot.

3. Tighten the blade

Now that the blade is in place, you need to tighten it. This can be done with a screwdriver or a wrench. Be sure to tighten it securely, but don’t over-tighten it. You don’t want to damage the blade or the saw.

4. Test the blade

Once the blade is installed, it’s time to test it. Cut a few pieces of wood to see how it performs. If the blade is too sharp or if it’s not cutting properly, you may need to adjust the tension. Be sure to read the owner’s manual for your scroll saw before making any adjustments.

5. Get the right scroll saw blade

When it comes to saw blades, you want to make sure you get the right one for the job. There are a variety of scroll saw blades on the market, so it’s important to do your research and find the best one for your needs.

6. Some factors to consider when choosing a blade include:

  • The type of material you will be cutting
  • The thickness of the material
  • The desired finish of the cut

The easiest way to choose a scroll saw blade is to match it to the type of wood you will be cutting. For example, there are blades designed specifically for hardwoods or softwoods. There are also general-purpose blades that can be used on a variety of materials. It’s also important to choose the right thickness of blade for the material you will be cutting. A blade that is too thick or too thin will not work properly and may cause damage to your scroll saw.

Finally, you may want to consider the finish of the cut. Some blades produce a smoother cut than others. If you need a very smooth finish, you may want to choose a blade with a higher number of teeth per inch. Once you’ve chosen the right blade, it’s time to install it on your scroll saw. This process is very simple and only takes a few minutes.

7. Install the blade on the saw

1. Make sure the saw is turned off and unplugged.

2. Open the saw arm and remove the old blade.

3. Insert the new blade into the blade clamp, making sure that the teeth are pointing downwards.

4. Close the arm and tighten the blade clamp screw.

5. Turn on the saw and slowly increase the speed.

6. Cut a piece of scrap wood to test the blade.

Once you have installed the new scroll saw blade, it’s time to test it out. Cut a piece of scrap wood to make sure that the blade is sharp and performs well. If everything looks good, then you’re ready to start cutting some real wood!

8. Cut your wood to the right size

To ensure a good fit, make sure to cut your wood to the right size before installing the scroll saw blade. This will help to prevent any accidents and make the whole process easier.

9. Sand it down

Use an emery board or fine-grit sandpaper to smooth out the blade’s cutting edge. Do this by hand, using gentle strokes. You don’t want to remove too much metal, but you do want to get rid of any burrs or rough spots that might cause the blade to snag or tear the wood.

10. Finish with a sealant or paint

Once you have chosen the blade you want to install, you will need to finish with a sealant or paint. This will protect the blade and keep it looking new for longer. Make sure to follow the manufacturer’s instructions for the best results.

11. Safety Precautions

When installing a scroll saw blade, it is important to take safety precautions. Make sure to wear goggles and gloves to protect your eyes and hands. Additionally, make sure the work area is well-lit and free of debris. Installing a scroll saw blade can be a challenging task. However, by following the steps outlined in this article, you can install a new blade with ease. Be sure to take safety precautions when working with blades, and have fun creating your projects!


Installing a scroll saw blade may seem daunting at first, but with a little know-how, it’s an easy process. We hope our simple guide has helped make the installation process less confusing. Scroll saw blades are an important part of any woodworking project, so it’s crucial to select the right one for the job. Thanks for following our guide on how to install a scroll saw blade!