Installing a blade on a Milwaukee circular saw can be daunting. There are so many different types of blades and installation methods, that it’s hard to know where to start.
That’s why I’m here! I’ll take you step-by-step through the process of installing a blade on your Milwaukee circular saw, using either the keyless or keyed blade clamp system.
Once you’ve installed your new blade, you’ll be able to cut through wood like butter. You’ll be able to make straight, accurate cuts with ease – and have more confidence in your work.
How to install the blade on the Milwaukee circular saw?
Here are some steps to follow when changing the blade:
The first step to installing a blade on the Milwaukee circular saw is to make sure that the power supply of the tool has been turned off.
Once you have completed this step, open up the blade guard and remove it from your current blade by pressing down on the spring-loaded lever with one hand, and rotating the lever out along with its corresponding blade shield.
Be sure to keep the blade guard in a safe place for future use.
Once you have removed the blade guard, you are ready to begin installing your new blade.
Slide your new blade into the opening at the end of the saw’s arbor hole, while ensuring that it is properly seated so that it cannot fall out again.
Next, close the saw’s arbor lock, which will clamp down on your blade to ensure it stays in place while you turn the saw back on.
Finally, return the blade guard to create a safe working environment for yourself when operating your Milwaukee circular saw.
To do this, simply line up the two arrow marks on the top of the blade guard with the corresponding arrows on the slot at the end of your saw, and push it back into place. Be sure to lock down the spring-loaded lever when you are finished so that your blade is guarded against any possible injury.
A Video On How to Install blade on Milwaukee Circular Saw
If you want to know how to install a blade on a Milwaukee circular saw then you come to the right place. After watching this you have a good amount of knowledge about how to install a blade on a Milwaukee circular saw.
Features of Milwaukee
- Saw blades are designed to cut fast. They can be used on wood, metal, and plastic.
- The blades of Milwaukee saws are made with alloy steel material, which is very tough and has a sharp edge. The teeth of the blade consist of a set of alternating left and right teeth that help make clean cuts every time.
- Milwaukee saw blades are split into two categories: abrasive and non-abrasive. Abrasive blades can be used for metal cutting purposes, while the other blades are designed to work on wood materials.
- The teeth of a blade come in different sizes to help match their purpose, as well as to maximize the cutting speed of the saw.
- Saw blades are available in different widths, ranging from one inch to three inches, and in either 12 or 24 teeth per inch (TPI). The larger the TPI count is for a blade, the finer the cut will be.
- All Milwaukee saw blades are able to fit on all Milwaukee saws.
- Most blades for Milwaukee saws come with a universal arbor design that enables them to be easily attached to the tool’s arbor. However, some blades made by other brands may require bushing in order to ensure proper compatibility with your particular model of Milwaukee saw.
How important is it to install the blade correctly?
Incorrect installation of a saw blade will result in it being misaligned or damaged due to the arbor lock not working. In case you are wondering, yes, incorrectly installed blades can be very dangerous. They increase the risk of kickback on your tool and cause damage to the blade itself.
Step 1: Remove the blade
Before you can replace your saw’s blade, you need to remove it from the saw. Insert a flat-head screwdriver into one of the slots on the saw’s body and twist the screwdriver to release the old blade. Once unlocked, pull away or push in on the blade to remove it from the base.
Step 2: Install the new blade
After removing the old blade, you are ready to install your replacement saw blade. Place the new blade into the body of the saw with teeth facing towards the front of the saw. Line up one of the slots on either side of your new blade with a notch at or near where it attaches to the base. Twist the blade in a clockwise direction and it should lock into place.
Step 3: Lock the new blade
Once the new saw blade is fully inserted, use your flat head screwdriver to twist it into its locked position by inserting it into one of the open slots on either side of your saw’s body and twisting counterclockwise. This will secure your new blade so that it doesn’t come loose while you are using your circular saw for cutting or other purposes.
Step 4: Test out your product
Your Milwaukee circular saw is ready to be used! You can test out its ability by cutting through any material that you need with a sharp edge. Check out some of our articles for more information about what Milwaukee tools should be used for specific purposes.
Always be sure to check the compatibility of your blade with your saw. If you aren’t able to find a specific blade that fits your model, most blades made by other brands will still fit on all
Milwaukee circular saws may require the use of a bushing in order for them to work. Weigh out how much you want to spend on blades, and which features matter most to you in your saw blade for Milwaukee. I hope this article was helpful.