how to install pin scroll saw blades

Installing a new scroll saw blade can seem daunting, but it’s really not that hard. In this article, we’ll show you how to do it quickly and easily. Scroll saw blades come in all shapes and sizes, so it’s important to choose the right one for the job. In this article, we’ll discuss the different types of blades and help you decide which one is best for your project. Once you’ve chosen the right blade, installation is a breeze. 

We’ll show you how to do it in just a few simple steps.

Choosing the Right Blade

There are a variety of blades available for scroll saws, and each one has its own unique purpose. The most common blades are the skip tooth, the standard tooth, and the double tooth.

Skip Tooth Blades

Skip tooth blades are ideal for cutting through thick materials. They have fewer teeth than standard tooth blades, so they can easily penetrate through tough materials.

Standard Tooth Blades

Standard tooth blades are perfect for general-purpose cutting. They have more teeth than skip tooth blades, so they provide a smoother finish.

Double Tooth Blades

Double tooth blades are designed for intricate cutting. They have twice as many teeth as standard tooth blades, so they’re perfect for detailed work.

Installing the Blade

Once you’ve chosen the right blade, installation is a breeze. We’ll show you how to do it in just a few simple steps.

1) Remove the old blade by unscrewing the screw that holds it in place.

2) Insert the new blade into the saw and tighten the screw to secure it in place.

3) Tension the blade by turning the knob on the side of the saw.

4) Cut a piece of scrap wood to test the new blade.

5) If necessary, adjust the blade tension until the blade cuts through the scrap wood without hesitation.

6) Your new blade is now ready for use!

Tips for Installing Pin Scroll Saw Blades

Installing a pin scroll saw blade can be a little tricky, but with a few tips, it can be done quickly and easily. Here are a few things to keep in mind:

1. Make sure the blade is properly aligned with the saw’s table before tightening the screws.

2. Tighten the screws evenly, and don’t over-tighten them or you may damage the blade or the saw.

3. If possible, use a clamp to hold the blade in place while you tighten the screws. This will help prevent the blade from slipping out of position.

4. Always wear safety glasses when using a scroll saw.

With these tips in mind, you should be able to install a pin scroll saw blade quickly and easily. Enjoy your new blade!

Benefits of Pin Scroll Saw Blades

Scroll saw blades come in many shapes and sizes, but the most popular type is the pin blade. Here are some reasons why you might want to choose a scroll saw blade with pins:

  • Pins help keep the blade stable as it cuts, which results in cleaner cuts and less tear-out.
  • Pins also help to prevent the blade from bending or buckling, which can cause problems like uneven cuts and vibration.
  • Pin blades are typically more durable than other types of blades, so they can withstand more wear and tear.
  • If you’re looking for a scroll saw blade that will give you clean, precise cuts, then a pinned blade is a good option to consider.


Choosing the right scroll saw blade can be confusing, but it’s important to select the right one for the job. In this article, we’ve discussed the different types of blades and shown you how to install them quickly and easily. We hope you find this information helpful!