How To Make A Scroll Saw From A Coping Saw | A Simple Guide

If you’re looking for a more affordable option, or if you want to be able to make larger projects, then converting a coping saw into a scroll saw might be the perfect solution for you. In this article, I will show you how to do it step by step.

Scroll saws are a great way to cut intricate designs and patterns in the wood. A scroll saw is a specialized type of saw that allows you to make very precise cuts, which is why they’re often used for making delicate wooden carvings.

What you’ll need?

To make a scroll saw from a coping saw, you’ll need the following materials:

  • Coping saw
  • Drill
  • 3/8-inch drill bit
  • Jigsaw with a fine blade
  • Ruler or tape measure
  • Marker or pencil
  • Fine grit sandpaper
  • Safety glasses
  • Work gloves
  • Drill chuck key
  • Phillips head screwdriver
  • Hacksaw
  • Carpenter’s level
  • Square
  • Socket wrench set
  • Tape measure or ruler
  • Hammer
  • Paint or a sealant (optional)

How To Make A Scroll Saw From A Coping Saw? Step by Step

A scroll saw is a great tool to have in your workshop, but it can be expensive. If you don’t have the budget for a new one, or if you’re just looking for a project to work on, you can make your own scroll saw from a coping saw. This is a relatively easy process and only requires a few simple tools.

  1. The first step is to remove the blade from the coping saw. This can be done by loosening the screws on the side of the saw and pulling the blade out.
  2. Once the blade is removed, you need to cut off the end of the saw that holds it in place. You can do this with a hacksaw or a Dremel tool.
  3. The next step is to drill a hole in the center of the saw blade.
  4. This hole needs to be large enough for the coping saw blade to fit through. You can use a drill bit or a jigsaw to do this.
  5. Once the hole is drilled, you need to attach the coping saw blade to the scroll saw. You can do this by using a screwdriver to put screws through the holes in the blade and into the saw.
  6. The last step is to attach the saw base to the coping saw. This can be done by using screws or bolts.

Once it’s attached, you’re ready to start cutting! Making your own scroll saw is a great way to save money, and it can be a fun project to work on. The process is simple and doesn’t require any special skills. So, if you’re looking for a new project, why not try making your own scroll saw? (Learn about Coping Saw Vs Scroll Saw)

Safety Tips

Here are some safety tips when making a scroll saw from a coping saw:

  • Always wear safety goggles when using power tools.
  • Be aware of your surroundings and keep your fingers away from the blade.
  • Use a dust mask to avoid inhaling wood dust.
  • Keep the area around your workspace clean and free of clutter.
  • Follow the manufacturer’s instructions for your particular scroll saw.
  • Do not force the blade through the wood.
  • Use a light touch when guiding the blade and let it do the work.
  • Be extra careful when working with small pieces of wood.
  • Always unplug the scroll saw before making any adjustments or changing blades.
  • Never leave the scroll saw unattended while it is turned on.

You might be interested in How To Use a Scroll Saw Safely?

Conclusion

That’s it! You now have a scroll saw. This is a great project to take on if you want to save some money and have a few tools already in your workshop. They are relatively inexpensive and can be used for many different projects around the house.  (Learn about why does it take so long to attach scroll saw blades)