Scroll saws are a great way to make intricate cuts on wood, and with the right techniques, it’s easy to make inside cuts.
In this article, I’ll show you how to make inside cuts with a scroll saw. It’s a simple process that anyone can do with a little practice.
With just a few simple steps, you can start making beautiful inside cuts on your woodworking projects. This technique will add extra detail and sophistication to your work.
How to make inside cuts with a scroll saw:
Here are some steps you should take to do this type of job:
Make a simple jig:
If you want to make inside cuts with a scroll saw, you can easily do so by creating a simple jig. All you need is a scrap piece of wood and a drill.
1. Drill a hole in the scrap piece of wood that is slightly larger than the thickness of your scroll saw blade.
2. Insert the scroll saw blade into the hole and tighten it down.
3. Cut a notch in the scrap piece of wood that is the same size as the thickness of your scroll saw blade.
4. Clamp the scrap piece of wood to your workbench and use it as a guide to making your inside cuts.
Making inside cuts can be tricky, so it’s important to take your time and be careful when using a scroll saw. With a little practice though, you’ll be able to make clean, precise cuts in no time!
If you’re looking for a scroll saw that’s perfect for making inside cuts, the DeWalt DW788 is a great option. It has a 20-inch throat depth and an adjustable blade guide that makes it easy to get precise results every time. Plus, it comes with a dust port that helps keep your work area clean and dust-free.
Clamp the jig to your workbench:
It’s important to clamp the jig to your workbench so that it doesn’t move around while you’re sawing. This will ensure that your cuts are straight and accurate.
Attach the blade:
Attach the blade to the saw according to the manufacturer’s instructions. Make sure that the teeth of the blade are pointing downwards.
Place the workpiece in the jig:
Carefully place the workpiece in the jig, making sure that it is aligned correctly.
Begin sawing:
Slowly and carefully saw along the marked line. Be careful not to apply too much pressure, as this can cause the blade to break. Take your time and go slow for accurate results. Repeat these steps for each inside cut you need to make.
When finished, unclamp the jig from your workbench and carefully remove the workpiece. Congratulations – you’ve just made an inside cut with a scroll saw!
Cut the kerf line on the waste side of the blade:
When you are ready to make the cut, position the blade over your marked line and hold the wood firmly against the table. You will also want to have your hands well away from the blade. Gently feed the wood into the blade and keep it moving at a steady pace. As you near the end of the cut, apply a bit of pressure to ensure that the saw goes all the way through. Remember to keep your hands well away from the blade!
If you are making a curved cut, mark your starting point and then make a small pencil mark on either side of the blade at the desired radius. Make sure that these marks are well inside of your cutting line.
Start by positioning your wood at the beginning of the cut and gently push it into the blade. Apply pressure as you near the end of the cut to ensure a clean finish.
Tips and Tricks:
Use a clamp to secure your workpiece in place. This will help to keep it from vibrating and give you more control over the saw.
Adjust the saw’s height and angle:
To make an inside cut with a scroll saw, you’ll need to adjust the saw’s height and angle. First, raise the saw blade to its highest point. Then, adjust the angle of the blade so that it’s pointing downwards.
Position your material:
Next, position your material so that the cut you want to make is facing upwards. Make sure that the part of the material that you don’t want to cut is lying flat against the saw table.
Start making your cuts:
Slowly guide the saw blade towards the material. Keep it pressed firmly against the material as you move it through it. Once you reach the other side, release the blade and allow it to retract back to its starting position.
Repeat the process:
Repeat the process until you’ve made all the cuts you need. always make sure that the blade is in its starting position before you begin making your next cut. Otherwise, you’ll end up with a jagged edge. Scroll saws are a great tool for making inside cuts. By adjusting the height and angle of the blade, and positioning your material correctly, you can make clean, precise cuts every time. So, if you need to make an inside cut, don’t hesitate to reach for your scroll saw!
Safety Precautions:
When using a scroll saw, always take the necessary safety precautions. Make sure that the blade is properly secured in its mount before turning on the saw. And never put your hands near the blade while it’s moving. Always use caution when working with power tools.
Conclusion
I hope that you have found this post helpful. Scroll sawing can be a fun and rewarding hobby, as well as a useful skill in the workshop. By following the techniques outlined in this post, you should be able to make clean and accurate inside cuts with your scroll saw. Happy scrolling!