How To Oil Your Dewalt Reciprocating Saw | Easy Guide

Do you own a DeWalt reciprocating saw? If so, then you know how important it is to keep your tool in tip-top shape. In order to do that, you need to make sure the blade is oiled properly. It’s easy and only takes a few minutes of your time each day. This guide will show you exactly how to oil your DeWalt reciprocating saw.

You don’t want your blade getting stuck or breaking mid-use just because it wasn’t oiled correctly, right? That would be terrible! So follow this guide and get back out there with your Dewalt saw today. We assure you that it won’t take long at all.

Things You Should Know About DeWalt Reciprocating

As you read through the steps below, it’s important to be aware of a couple of things.

First, make sure to wear safety glasses and gloves while you oil your saw. It’s an obvious step but it doesn’t hurt to specify.

Secondly, remember that oiling your saw should be part of your monthly routine. It only takes a few minutes but it will save you time and frustration later on.

Before you can oil the blade of your reciprocating saw, you need to make sure that the saw is turned off completely. This keeps you safe while doing the rest of the steps and is important for safety reasons as well.

So if your power cord has run out of batteries or if it’s just been sitting there all day long without being touched, now would be a good time to turn it off completely so we can get started with our oiling process.

What You’ll Need During This Process

Make sure you have everything set up before you go through this process. You’ll need the following items:

  • DeWalt Reciprocating Saw
  • A shallow pan or rag for catching excess oil
  • Oil (3-in-1 is usually recommended)

I personally recommend this oil

How To Oil Your Dewalt Reciprocating Saw Step By Step

Now that we know what to consider and what we need during the process, let’s start the oiling process.

Step 1

First, you should make sure the blade is near the edge of your saw. If it’s not, then do that now.

Step 2

Once there, take a rag and place it underneath the area where you are going to oil your saw. This will help catch excess oil so it doesn’t get all over your working surface or anything else for that matter.

Step 3

Now that everything is set up properly, start by taking an appropriate amount of oil (a few drops should suffice) and slowly pour it onto the teeth of the blade while making sure to coat them evenly.

Step 4

Wait for about five seconds before doing this next step so that once you do it, you can have immediate access to oiling each tooth again if need be.

Step 5

Once you have oiled each tooth of the saw, turn on your tool to test it. This is an important step because if there are any parts that are not oiled correctly, this will let you know.

Step 6

If everything works properly after oiling the blade, then job well done! You have successfully taken care of your DeWalt reciprocating saw so that you can get back out there and resume work.

You might be interested in How To Disassemble A Dewalt Reciprocating Saw

Tips For Oiling DeWalt Reciprocating Saw

Remember, this is only a guide to teach you the best way to oil your DeWalt reciprocating saw. It’s important to know that there are many different ways of doing it and each one may work for you. This guide will help get you started on what works for most people but if it doesn’t seem right for you, then feel free to adjust it as needed.

Here are some tips that should help with your oiling process:

  • Make sure that you place the rag under where the blade will be before starting the process of putting lubricant on the saw teeth so that excess oil does not go on anything else.
  • Use an appropriate amount of oil (3-in-1 usually works well).
  • If you need to oil the blade again after being turned on, do so very sparingly.
  • Do not boil too much or it will seep onto the handle of your saw which will lead to slippery surfaces.
  • Remember that you should always have safety glasses and gloves on while doing this.
  • Make sure to clean up any messes made with the excess oil so they don’t cause an accident later on down the road.
  • When taking apart the DeWalt reciprocating saw, always make sure everything is completely dry before putting them back together again. This will ensure that your next use goes smoothly with no hiccups along the way.

Other Things To Consider For Dewalt Reciprocating Saw

Be sure to do a monthly inspection of the saw where you check for any parts that need to be replaced or tightened up. It’s a good idea to do this procedure before oiling your DeWalt reciprocating saw as well.

Also, other than these procedures, there isn’t much else you can do to maintain your DeWalt reciprocating saw other than using it throughout the course of its normal functions and cleaning up after yourself when done. Learn about How to clean Dewalt reciprocating saw

Now go out and get started with doing The Best Way To Oil Your DeWalt Reciprocating Saw today so you can get back to work and catch up on what you have been putting off!

Conclusion

So there you have it! Some of the most useful information on the best way to oil your DeWalt reciprocating saw. Always make sure to follow the procedures, tips, and other important things mentioned in this article if you want your saw to last as long as possible.

Hope this blog post helped you to oil your DeWalt reciprocating saw. Learn more about How To Fix A Reciprocating Saw Blade

FAQs

Q: How often should I oil my blade?

A: Typically, you should be oiling your saw once a month. However, if you use it every day of the week then you might need to do this process weekly or daily depending on how often you use your blades. If you don’t use it more than twice a month, then oiling monthly is typically sufficient.

Q: Where can I find safety glasses and gloves?

A: Both safety glasses and gloves can be found at your local hardware store in the tools section or with other similar items. A good rule of thumb when buying anything is to look up the item online first so that you can see what you’re getting before leaving the store. I recommend this glass and gloves

Q: What is the best oil to use for my saw?

A: The answer to this depends on personal preference. Some people prefer using other types of oil while others like 3-in-1. However, it’s typically recommended that you should use whatever type of oil works best for your saw and its blade.

Q: How often should I oil my DeWalt reciprocating saw?

A: You should oil lubricant into your blade at least once a month or after each use, whichever you think is suitable for your type of work. This will help keep the blade functional and ensure that it does not rust too quickly for use later down the road.