Scroll saw blades are notorious for snapping, but there are a few things you can do to stop it from happening. In this article, we’re going to teach you how to stop your scroll saw blade from snapping in no time at all.
It’s an easy process that only takes a few minutes of your time. Follow these simple steps and you’ll be able to cut through wood like butter – without the risk of damaging your blade. Scroll down for the instructions now!
How To Stop Snapping Blades On A Scroll Saw
Here are some steps to follow:
1. Make sure your blade is properly tensioned. A blade that is too loose will vibrate and cause it to snap. Learn about How To Tension A Scroll Saw Blade?
2. Make sure your workpiece is securely clamped to the table. If it moves around, it can cause the blade to snap.
3. Use a slower speed when cutting intricate designs. A fast speed can cause the blade to snap if it’s not properly tensioned or if the workpiece isn’t clamped down tightly.
4. Keep your blades sharp. A dull blade can cause the blade to snap more easily than a sharp blade.
5. Always use caution when handling blades. Never touch the teeth of the blade as it can cause serious injury.
6. Store your blades in a safe place when not in use. Blades can be dangerous if they’re mishandled, so it’s important to keep them out of the reach of children and pets.
7. Follow the manufacturer’s instructions for your scroll saw. Each saw is different, so it’s important to read the instructions carefully to make sure you’re using it correctly.
8. Seek professional help if you are having trouble stopping blades from snapping. A professional can help you troubleshoot the problem and find a solution.
Fixing the problem:
Check the blade tension:
If your blades are consistently snapping, chances are the blade tension is too tight. Loosening the blade tension can help to prevent the blades from snapping.
Use a narrower blade:
A narrower blade will have less flex and will be less likely to snap. If you are having trouble with blades snapping, try using a narrower blade.
Use a higher tooth count blade:
A higher tooth count blade will have more teeth per inch and will be less likely to snap. If you are having trouble with blades snapping, try using a higher tooth count blade. Learn about What does the numbers mean in scroll saw blades
Keep the blade lubricated:
If the blade is not lubricated, it will be more likely to snap. Make sure to keep the blade lubricated by using a saw blade lubricant or spraying the blade with WD-40.
Keep the blade cool:
If the blade is too hot, it will be more likely to snap. Make sure to keep the blade cool by using a blade cooling agent or spraying the blade with cold water.
Use a thicker blade:
A thicker blade will have more stability and will be less likely to snap. If you are having trouble with blades snapping, try using a thicker blade.
Make sure the blade is aligned with the table:
When adjusting the saw blade, make sure it is parallel with the table. This can be done by eye or by using a ruler to check the alignment. If the blade is not aligned with the table, it will cause the saw to vibrate and may cause the blade to snap.
Use a sharp blade:
One way to avoid having your blades snap on a scroll saw is to use a sharp blade. Dull blades are more likely to snap than sharp blades. Make sure that you keep your blades sharp by using a honing guide or sharpening stone.
Use the correct blade for the material:
Another way to avoid snapping blades on a scroll saw is to use the correct blade for the material you are cutting. For example, if you are cutting metal, use a metal-cutting blade. If you are cutting wood, use a Wood-cutting blade. Using the incorrect blade can cause your blade to snap. Learn about what type of blade will cut metal on a scroll saw
Support long pieces of wood:
One way to stop your scroll saw blade from snapping is to make sure you are using a blade that is appropriate for the material you are cutting. For example, if you are trying to cut a piece of wood that is long and thin, make sure to use a fine-toothed blade rather than a thicker one.
You can also support the wood you are cutting by using a vise or a clamp. This will help to keep the wood from bending and causing the blade to snap. Another way to prevent your scroll saw blade from snapping is to use a slower speed when cutting.
This will help to ensure that the blade is able to cut through the material without too much force. You can also use a lubricant to help the blade move more easily through the material.
If you are having trouble getting the blade to stay in place, you can try using a scroll saw table. This will help to keep the workpiece stable and make it easier to cut. You can also use a feather board to hold the workpiece against the table. This will help to keep it from moving around while you are cutting.
Cut at a moderate speed:
If you are constantly snapping the blades on your scroll saw, it might be because you are trying to cut too fast. When cutting, make sure to go at a moderate speed so that you don’t put too much stress on the blade. This will help to keep it from snapping.
You might be interested in How To Repair Broken Pin End Scroll Saw Blade
Safety Precautions
When working with a scroll saw, it is important to take precautions to ensure your safety. Here are a few tips to help you avoid accidents:
1. Always wear safety goggles when using a scroll saw. The blades can fly off the saw and cause serious eye injuries.
2. Do not reach over the blade or attempt to cut anything that is too close to the blade. You could easily lose a finger if you’re not careful.
3. Make sure the workpiece is securely clamped to the table before starting to cut. This will help keep it from moving around while you’re cutting and minimize the chances of an accident.
4. Keep your fingers out of the way of the blade. Even a small nick can cause a lot of pain.
5. Do not try to force the blade through the workpiece. If it’s not going through easily, it’s probably because the blade is too dull. Change the blade and try again.
6. Never leave the saw running unattended. Turn it off when you’re not using it.
7. Be aware of your surroundings. Make sure there is plenty of clearance around the saw in case it starts to kickback.
If you follow these safety tips, you can avoid most of the hazards associated with using a scroll saw. However, accidents can still happen, so it’s always best to be cautious when using this type of saw. Learn more about How To Use a Scroll Saw Safely?
Conclusion
Here are some ways to stop snapping blades on your scroll saw: make sure you have the correct blade for the job, use a feather board to keep the workpiece against the fence, and apply pressure evenly.
If you follow these tips, you should be able to avoid snapped blades and get more efficient cuts from your scroll saw. Have you had problems with snapped blades in the past? What methods do you use to prevent them? Let us know in the comments below.