how to transfer scroll saw art work

Scroll saw art is a beautiful way to decorate your home. But getting the art from the scroll saw onto your wall can be a challenge. It’s important to use the right transfer method to ensure that your art looks its best. That’s why we’ve put together this guide on how to transfer scroll saw artwork. We’ll show you three different methods, so you can choose the one that works best for you.

Methods of transferring scroll saw artwork:

There are a few different methods that can be used to transfer the design from the pattern to the wood. The most common methods are tracing, carbon paper, and transferring pens.


The easiest way to transfer the design is by tracing it onto the wood with a pencil. This can be done by placing the pattern on top of the wood and lightly tracing over the lines with a pencil. You can also use a lightbox to make the tracing easier.

Carbon paper

Another common method is using carbon paper. This is done by placing the carbon paper between the pattern and the wood and then tracing over the lines with a pencil. The carbon paper will transfer the design onto the wood.

Transferring pens

There are a few different types of transferring pens available, but they all work in a similar way. The transferring pen has a porous tip that absorbs the ink from the pattern. When you trace over the lines with the transferring pen, it will transfer the ink onto the wood.

What type of scroll saw blade do you need for the project?

There are many different types of scrolls saw blades to choose from, and the right blade for your project depends on the type of material you’re cutting. If you’re new to scroll sawing, it might be a good idea to start with a basic blade and work your way up to more specialized blades as you gain experience.

How do you transfer the design to the wood?

There are a few different ways to transfer your design to the wood, but the most common method is to use a template. You can either create your own template or purchase one from a craft store. Another option is to draw the design on the wood with a pencil or marker and then cut it out with a jigsaw.

How do you cut the scroll saw artwork?

Once you’ve transferred the design to the wood, it’s time to start cutting. The easiest way to do this is to use a scroll saw blade that’s the same size or smaller than the thickness of your wood. Start by making a few test cuts in a scrap piece of wood to get familiar with the saw and the blade. Then cut along the lines of the design, making sure to keep the blade perpendicular to the wood.

The different types of blades and what they’re used for:

Scroll saw blades come in a variety of shapes and sizes, each with its own unique purpose. The most common type of blade is the standard flat blade, which is used for general cutting. For more intricate cuts, you’ll want to use a spiral blade or a fretwork blade. Spiral blades have a specially designed tooth pattern that allows them to make more delicate cuts, while fretwork blades are thin and have a pointed tip that can get into tight spaces. You’ll also want to choose the right blade for the type of wood you’re using. Hardwoods require a tougher blade that can stand up to the rigors of cutting, while softer woods can be cut with a less aggressive blade. Always read the manufacturer’s instructions to make sure you’re using the right blade for the job.

Safety Precautions

When transferring the scroll saw the artwork, it is important to take some safety precautions. Here are a few things to keep in mind:

1. Make sure the blade is unplugged before you start.

2. Wear safety goggles to protect your eyes from any debris that might fly up.

3. Keep your hands and fingers clear of the blade at all times.

4. Be very careful when using a blade that is larger than the piece you are transferring. It can be easy to lose control and cause serious injury.

5. If you are using a saw with a laser guide, make sure it is turned off before you start. Lasers can be very dangerous if you are not careful.

6. Always follow the manufacturer’s instructions for your scroll saw.

7. Never try to fix a scroll saw yourself. If there is a problem, take it to a qualified technician.

8. Keep your work area clean and organized. This will help prevent accidents from happening.

How do you finish the project?

Once you’ve finished cutting, it’s time to finish the project. The most common way to finish a scroll saw project is to apply a coat of finish to the wood. You can use a variety of finishes, such as lacquer, varnish, or paint. Another option is to leave the wood unfinished, which will give it a natural look. Scroll saw artwork can be a great way to showcase your creativity and skill. By following these simple steps, you can create your own scroll saw artwork and add a unique piece to your collection.


Scroll saw art is a beautiful and unique way to decorate your home. It can also be quite expensive, depending on the complexity of the design. If you’re looking to save some money, or want to create a scroll saw masterpiece that’s uniquely your own, there is a way to transfer the image from the wood onto another surface. In this article, we’ve outlined the steps necessary to complete this process. Have you tried it before? What was your experience? Let us know in the comments below!