Are you having trouble with your Dewalt table saw? If so, don’t worry – you’re not alone. Many woodworkers and carpenters have difficulty unlocking their Dewalt table saws, but it’s relatively easy to do once you were the know-how.
In short, to unlock a Dewalt table saw, you need to remove the throat plate, remove the blade guard, and then release the tilt lock lever.
Keep reading because in this blog post, we’ll show you step-by-step how to unlock a Dewalt table saw so that you can get back to work as soon as possible.
How To Unlock A Dewalt Table Saw?
You don’t have to be an expert woodworker to remove this board. It’s a quick and easy procedure that doesn’t take much longer than a few minutes, even if you’re inexperienced with mitre saws.
The majority of the components include knob and locking pins in various locations to secure the mitre saw.
So, all you have to do now is figure out the knobs and use them correctly to unlock the mitre saw. When starting a new project, here are the elements that you’ll need to unlock.
What Type Of Dewalt Table Saw Do You Have:
First and foremost, you’ll need to know which model of Dewalt table saw you have before you can start the unlocking process.
There are two main types of Dewalt table saws on the market – sliding and non-sliding. Sliding Dewalt table saws have a blade that slides along a rail, while non-sliding Dewalt table saws have a stationary blade.
Once you’ve identified your model of Dewalt table saw, it’s time to move on to the unlocking process.
The Four Types Of Dewalt Table Saw Locks:
There are four main types of locks used on Dewalt table saws – release levers, cam levers, knobs, and pins. Each type of lock is located in a different part of the saw, and they all serve a different purpose.
- Release levers are usually located near the front of the saw, and they’re used to unlock the blade so that it can be moved.
- Cam levers are located near the back of the saw, and they’re used to unlock the fence so that it can be moved.
- Knobs are located on either side of the saw, and they’re used to tighten or loosen the blade.
- Pins are located in various parts of the saw, and they’re used to hold the blade in place.
Now that you know the four main types of locks used on Dewalt table saws, it’s time to learn how to unlock each one.
Unlocking A Release Lever:
The first step is to locate the release lever. It’s usually located near the front of the saw, and it looks like a small lever.
Once you’ve found the release lever, push it down with your thumb and hold it in place. Then, use your other hand to move the blade back and forth until it’s free from the release lever.
Unlocking A Cam Lever:
The next step is to locate the cam lever. It’s usually located near the back of the saw, and it looks like a small knob.
Once you’ve found the cam lever, turn it counterclockwise with your thumb and hold it in place. Then, use your other hand to move the fence back and forth until it’s free from the cam lever.
Unlocking A Knob:
The next step is to locate the knob. It’s usually located on either side of the saw, and it looks like a small knob. Once you’ve found the knob, turn it counterclockwise with your thumb and hold it in place.
Then, use your other hand to move the blade back and forth until it’s free from the knob.
Unlocking A Pin:
The next step is to locate the pin. It’s usually located in various parts of the saw, and it looks like a small knob.
Once you’ve found the pin, turn it counterclockwise with your thumb and hold it in place. Then, use your other hand to move the blade back and forth until it’s free from the pin.
Once you’ve unlocked all of the locks on your Dewalt table saw, you should be able to move the blade and fence freely. If you’re still having trouble, consult your saw’s manual for more information.
Table Saw Safety Tips:
Now that you know how to unlock your Dewalt table saw, it’s important to remember the following safety tips:
- Always wear safety goggles when using the saw.
- Make sure the blade is aligned correctly before cutting.
- Don’t force the blade through the material – let it do the work.
- Keep your hands and fingers clear of the blade at all times.
- Don’t stand directly in front of the saw when cutting.
- Make sure the workpiece is securely clamped to the table before cutting.
By following these safety tips, you can help reduce the risk of injury while using your Dewalt table saw.
Conclusion:
Now that you know how to unlock your Dewalt table saw, you can get back to work with ease. Remember to follow the safety tips listed above, and consult your saw’s manual for more information. Thanks for reading!
