Wondering what is a scroll saw blade length pin to pin?
A scroll saw blade length pin to pin is the distance between the two pins on a scroll saw blade. This measurement is important when selecting a new scroll saw blade.
Make sure you select the right scroll saw blade for your project by measuring the distance between the pins. This will ensure that your project turns out just how you want it.
What is a scroll saw blade length pin to pin:
A scroll saw blade length pin to pin is the distance between the two pins in the middle of a scroll saw blade.
This distance can vary depending on the type of scroll saw blade and the project you are working on.
When choosing a scroll saw blade, it is important to make sure that the blade length pin to pin is the same as or longer than the thickness of your project’s material.
You can also adjust the blade length pin to pin by changing the position of the pins in the blade. Doing so will allow you to cut materials with different thicknesses.
If you are unsure of what size scroll saw blade to use, it is best to start with the largest size and then adjust as needed.
A larger scroll saw blade will make faster, cleaner cuts, but it can be more difficult to control.
A smaller blade is easier to control but will take longer to cut through your project’s material.
Types of scroll saw blade length pin to pin:
Here are the three types of scroll saw blade length pin to pins:
This is the most common type of pin and it’s used in most scroll saws. The standard pins are .025″ in diameter and they’re usually made from high-carbon steel.
Metric pins are also common, and they measure .6mm in diameter. They’re usually made from stainless steel, which makes them resistant to corrosion.
Tapered pins are less common than the other two types, but they offer some advantages. They have a smaller diameter at the tip than at the base, and this makes them less likely to bind in the kerf. They’re also easier to remove from the wood than standard pins.
How to determine scroll saw blade length pin to pin:
Now that you know about the different types of pins, how do you determine which one you need?
The easiest way is to measure the diameter of the hole in the saw’s table and then match it up with the corresponding diameter of one of the pins.
You can also use a caliper to measure the diameter of the pins if you want to be more precise.
Once you’ve determined the size of the pin you need, all you have to do is find a blade that has that same size pin.
Most blades come with a variety of different-sized pins, so you should be able to find one that fits your saw.
Just make sure to check the diameter of the hole in the saw’s table to make sure that the blade will fit.
Some blades also come with a locking pin, which is used to keep the blade in place.
If your saw doesn’t have a locking pin, you can use a small washer or a piece of metal tubing to keep the blade from slipping out.
Benefits of a scroll saw blade length pin to pin:
Here are some benefits of having a scroll saw blade length pin to pin:
1. Increased accuracy
When the blade is correctly aligned with the pins, it results in greater accuracy while cutting. This is because there is very little wiggle room for the blade to move, so it stays in place while you’re working.
2. Easier to use
With less blade movement, you’re less likely to make mistakes while cutting, which makes using a scroll saw much easier.
3. Reduced vibration
Scrolling blades tend to vibrate quite a bit when in use. By having a longer pin-to-pin setup, this vibration is reduced, making for a smoother cut.
4. Improved safety
As mentioned earlier, if the blade is incorrectly aligned, it can move around a lot. This increases the chances of the blade hitting your fingers or hands while you’re working, which can be quite dangerous. With a length pin to pin setup, this is much less likely to happen.
So, if you’re looking for greater accuracy, ease of use, and reduced vibration when using a scroll saw, then a blade length pin to pin is the way to go.
What is the typical scroll saw blade length?
The scroll saw blade length is typically pinned at 18 inches. However, there are shorter and longer blades available.
What is the difference between a pinless blade and a pinned blade?
A pinned blade has pins that hold the blade in place on the saw. A pinless blade does not have pins and relies on tension to stay in place.
Which is better, a pinned or a pinless blade?
There is no definitive answer as both have their pros and cons. A pinned blade is more secure, but a pinless blade is easier to change.
How do I measure the length of my scroll saw blade?
To measure the length of your scroll saw blade, use a ruler to measure from the tip of one blade tooth to the tip of the next tooth. Then, multiply this number by two to get the blade length.
How important is it to have a scroll saw blade the proper length?
Having a scroll saw blade that is the proper length is important as it helps to ensure accuracy and stability while cutting. A blade that is too short or too long can cause problems while cutting.
Scroll saw blade length pin to pin should be around 24-25 inches. We showed you how to measure and select the best scroll saw blade for your needs.
We hope this article was helpful. If you have any questions, please don’t hesitate to ask in the comments section below.