What size blade does a Ryobi circular saw

If you’re a carpenter or use a circular saw for DIY projects, you may be wondering what size blade to use with your Ryobi saw. This blog post will give you some tips on choosing the right blade size for your needs. Keep in mind that there is no one “correct” answer to this question – it all depends on what type of cuts you need to make. So read on to learn more about What size blade does a Ryobi circular saw.

What size blade does a Ryobi circular saw:

Ryobi doesn’t make their own circular saw blades, which means that the blade size is going to depend on what brand you buy. Ryobi recommends that customers use DeWalt or Oregon blades with their products, but this doesn’t mean that other brands won’t work too. If a different type of blade becomes bent or damaged due to use, you can always replace it with one of Ryobi’s recommended blades.

While different blade sizes are made for different purposes, the general rule is that they can be divided into two categories:

Circular saws typically have a blade guard mounted in front of the cutting edge to keep your hands safe when they’re in use. When the guard is retracted, it’s meant for cutting wood. When the guard is extended, it’s meant to be used for cutting metal or other materials besides wood.

If you’re using the saw primarily for non-metal projects, you’ll want to have the guard retracted so that you can maximize your cutting precision. Keep in mind that when working with the guard down, you’ll need to hold the saw so that you can see where you’re cutting. This is because there’s no separation between the material and your hands with the blade extended.

Ryobi circular saws are compatible with several different blade types:

For example, the most common blade is a seven-inch blade that can cut wood or metal materials. The teeth on this blade are good for general use and most people find it to be an all-purpose blade.

However, if you’re planning to cut thick sheets of plywood or metal, you’ll need a special blade that’s capable of slicing through those materials. With Ryobi circular saws, you can also attach blades specifically suited for cutting soft lumber and plywood as well as cutting masonry materials such as brick and concrete blocks.

Another factor to consider when choosing a size is the diameter of your circular saw.

The table below lists common blade types for Ryobi circular saws, along with the diameter of each blade. Note that this is not necessarily the size of the entire saw head – just the dimension of the circular part surrounding the blade.

7-inch Circular Saw Blades

7 1/4-inch Circular Saw Blades

7-inch Circular Saw Blades

10-inch Circular Saw Blades and Full Circle Saw Blades

8 1/4-inch Circular Saw Blades

5 3/8 – inch Circular Saw Blades

25mm Circular Saw Blade

The size of the blade you choose will ultimately depend on what kind of Ryobi circular saw head is attached to your saw.

To determine the blade diameter on any Ryobi circular saw model, simply look at the point where the blade attaches to the circular saw head.

You should see one of four numbers here: 7, 8 1/4, 10 or 25mm. This corresponds with the table above and is therefore the size of the blade that will fit on your Ryobi circular saw.

Finally, another factor to consider when selecting the right blade size is how much power your Ryobi circular saw has. If you have an older Ryobi circular saw model, chances are it won’t be able to handle cutting through thick plywood or metal materials. It’s best to check the user’s manual for your specific model before purchasing a blade to make sure you get the right size for your saw.


What is the most common blade size for a Ryobi circular saw?

Answer: 7-inch blades are the most commonly used on Ryobi circular saws. These blades come in different types, but the most common type of blade is one that can be used for both wood and metal.

Why do I need to consider power when choosing a circular saw blade?

Answer: Power affects the size of a blade that you should use. If you have a pre-2003 Ryobi circular saw, it’s probably not going to have enough power to handle cutting through metal or thick wood. It’s important to check your user manual before buying a new blade for your Ryobi circular saw because the wrong blade could damage the tool.

What are some common uses for circular saw blades?

Answer: The most common use for a Ryobi circular saw blade is to cut through wood materials, but they can also be used for cutting metal or concrete materials. These blades come in different types and sizes to suit whatever material you’re working with.


Hopefully, this article finds you well. It was informative to you. If you have any questions or concerns, please comment below. Thank you for reading this article.