Do you know what’s really going on when your chain saw jerks when you pull the cord? Most people think it has something to do with the engine, but that’s not actually the case. In reality, there are a few different things that could be causing your chain saw to jerk.
We’re going to tell you what they are so you can fix the problem and get back to work. Keep reading to find out more about why your chain saw is jerking and how to fix it!
Why does a chain saw jerk when you pull the cord
1. Improper chain tension
One of the most common reasons your chain saw might jerk when you pull the cord is because the chain is too loose. If the chain isn’t tight enough, it can jump off of the bar and cause all sorts of problems. Make sure to check the tension of your chain regularly and adjust it as needed.
2. Dull chain
If your chain is dull, it will also cause your chain saw to jerk when you pull the cord. A dull chain can’t cut through the wood as easily, so it will jump around a lot. Make sure to sharpen your chain regularly and replace it when it gets too dull.
3. Damaged bar
If your bar is damaged, that can also cause your chain saw to jerk when you pull the cord. If the bar is bent or warped, it won’t be able to hold the chain in place properly, which will make it jump around. If you think your bar might be damaged, take it to a professional to have it fixed.
4. Dirty air filter
If your air filter is dirty, it can restrict the airflow to your engine and cause your chain saw to jerk when you pull the cord. Make sure to clean or replace your air filter regularly to prevent this from happening.
5. Dirty spark plugs
Dirty spark plugs can also cause your chain saw to jerk when you pull the cord. The dirt can prevent the spark plugs from firing properly, which will make the engine run erratically. Make sure to clean or replace your spark plugs regularly to keep them in good condition.
How to fix it if it’s jerking?
There are a few things you can do to try to fix a chain saw that’s jerking when you pull the cord. First, make sure the chain is properly lubricated and that the chain brake is working correctly. You can also try adjusting the carburetor to make sure it’s set up correctly. If none of these solutions work, you may need to take the chain saw in for repair.
How can you safely avoid the jerking motion when using a chain saw?
The jerking motion of a chain saw can be dangerous and cause serious injury. To avoid this, follow these simple tips:
- Always keep a firm grip on the saw with both hands.
- Use your body weight to help stabilize the saw.
- Keep the saw blade sharp and properly tensioned.
- Be extra careful when cutting near the ground.
- Don’t try to force the saw through a hard obstruction.
- If the saw starts to jerk, release the trigger and wait for it to stop before resuming cutting.
Tips to fix a chainsaw that jerks when you pull the cord
If your chainsaw is jerking when you try to start it, there are a few things you can do to try to fix the problem. First, check the chain to make sure it is not damaged or dull. If the chain is damaged or dull, it will need to be replaced. You can also try to adjust the chain tension. If the chain tension is too tight, it will cause the chainsaw to jerk when you pull the cord. You can also try to clean the air filter and spark plug. If these parts are dirty, it can cause the chainsaw to jerk when you try to start it. Finally, make sure you are using the correct type of fuel and oil. If you are using the wrong type of fuel or oil, it can also cause the chainsaw to jerk when you try to start it.
Conclusion
So, there you have it! We’ve answered the question of why a chain saw jerks when you pull the cord. Now that you know, hopefully, you can avoid getting surprised (or worse) when using this powerful tool. If you have any other questions about how your favorite tools work or just want to geek out about all things chainsaws, feel free to leave us a comment below.
FAQs
Q 1. What are some of the reasons a chain saw might jerk when you pull the cord?
A. There are several things that can cause a chain saw to jerk when you pull the cord. One reason is that there may be a problem with the engine. Another possibility is that the chain is too tight or too loose. Additionally, if the chain isn’t lubricated properly, it can cause the chain saw to jerk. Finally, if the wood you’re cutting is too wet, it can also cause problems.
Q 2. How do I fix a chain saw that’s jerking?
A. If your chain saw is jerking, there are several things you can do to try and fix the problem. The first thing you should do is check the engine to see if there’s a problem. If the engine seems to be fine, then the next thing you should check is the chain. Make sure that it’s not too tight or too loose. Also, be sure to lubricate the chain properly. If the wood you’re cutting is too wet, try drying it out before you start cutting.
Q 3. What should I do if my chain saw still jerks even after I’ve tried all of these things?
A. If your chain saw continues to jerk after you’ve checked the engine and lubricated the chain, it’s possible that there’s something wrong with the saw itself. In this case, you may need to take it to a professional for repairs.