Do you own a Stihl chain saw?
If so, you may have experienced the issue of your chain saw flooding easily. This can be frustrating and cause a lot of downtime while you try to figure out what’s going on.
We want to help you get back up and running as quickly as possible, so we’ve put together this guide on why your chain saw is flooding and how to fix it. We hope it helps!
Why does my sthil chain saw flood so easily:
Here are some reasons why your Stihl chain saw might be flooding:
- If the oil tank is full and the saw is running out of fuel, the saw will flood because it’s not getting enough air.
- If the air filter is dirty and not allowing enough air to the engine, the saw will flood because it’s not getting enough oxygen.
- If the spark plug isn’t working properly, it won’t create a spark to ignite the fuel in the engine. This will cause the saw to flood.
- If there’s something wrong with the carburetor, it might not be mixing the fuel and air correctly. This can also cause the saw to flood.
- If the chain is too tight, it will put too much pressure on the engine and it won’t be able to spin freely. This can cause the saw to flood.
- If the guide bar is too low, it will hit the ground before the chain has had a chance to cut all the way through the wood. This can also cause the saw to flood.
- If the chain brake isn’t disengaging properly, it will stop the chain from moving forward and the saw will flood.
- If there’s something wrong with the clutch assembly, it might not be engaging properly and this can also cause the saw to flood.
- If you’re using the saw in wet conditions, this can also cause it to flood more easily.
If your Stihl chain saw is flooding, it’s important to figure out what the cause is so you can fix it. Otherwise, you might damage the engine and ruin the saw.
How to fix the sthil chain saw flooding issue:
Here are some steps how to fix your sthil chain saw if it keeps flooding:
Step:1
Make sure the oil cap is on tight and that there is enough oil in the chain saw. If there is too much or too little oil, it can cause the chain saw to flood.
Step:2
Check the air filter to make sure it’s not clogged. A clogged air filter will prevent the chain saw from running properly and could also lead to its flooding.
Step:3
Clean out any debris that may be blocking the chain saw’s exhaust port. This can also cause the chain saw to flood.
Step:4
Make sure the chain brake is disengaged before starting the chain saw. Engaging the chain brake while the chain saw is running can cause it to flood.
Step:5
Start the chain saw in a clear, open area. If you try to start it in a cramped space, it can cause the chain saw to flood.
Step:6
Allow the chain saw to run for a few minutes after turning it off. This will help expel any excess oil that may have built up inside the engine and could lead to the chain saw flooding.
Step:7
Contact your local STIHL Dealer for assistance if you’re still having problems with your chain saw flooding. They can help troubleshoot the issue and may need to perform some repairs.
How to prevent sthil chain saw from flooding so easily:
Here are some steps how to prevent sthil chain saw from flooding so easily.
- Check the air filter to see if it is clean. A dirty air filter will restrict airflow and cause the engine to flood.
- If the air filter is clean, check the carburetor to see if it is clogged. A clogged carburetor will also restrict airflow and cause the engine to flood.
- Make sure that the spark plug gap is set correctly. If the gap is too wide, it can cause the engine to flood.
- Finally, make sure that you are using fresh fuel that has not been sitting in the tank for more than 30 days. Old fuel can clog up the carburetor and cause the engine to flood.
If you follow these steps, you should be able to prevent your sthil chain saw from flooding so easily.
FAQs:
What are the consequences of a chainsaw that floods?
If your chainsaw floods, it will not run properly. The engine may stall, or the chain may come off the bar. In extreme cases, the saw may even burst into flames. It is therefore important to take steps to prevent your chainsaw from flooding.
How can I tell if my chainsaw is flooding?
There are several signs that your chainsaw is flooding. The engine may stall, the chain may come off the bar, or the saw may start making a strange noise. If you notice any of these symptoms, stop using the saw and inspect it for damage.
What should I do if my chainsaw floods?
If your chainsaw floods, you should stop using it immediately. Inspect the saw for damage, and take it to a qualified repair technician. Do not try to fix the saw yourself – you may damage it further.
Conclusion:
We showed you how to fix the chain saw so that it doesn’t flood. By following these simple steps, your chain saw should be running smoothly in no time at all.
Have you tried this process on your own chain saw? What challenges did you face and how did you overcome them? Let us know in the comments below!
